Hydrostatic Sensor Paver Finisher - Exporter, Manufacturer & Supplier, Mehsana, India

Product Code : 06

[Select]

Product Specification

Hydrostatic Sensor Paver Finisher

Application

Advance Technology
Asphalt and Wet Mix Paving
World Class Hydraulic and Sensor System
Accurate Grade and Slope Sensor.

Prime Mover
Hp-250 is powered with powerful water-cooled diesel Engine Developing 105 HP @2200 RPM. Engine has large cooler assembly with innovative air routing, perfect cooling. The engine is easily accessible for daily maintenance like checking engine oil, coolant water level, engine suction filter etc. Engine starter, alternator can be easily removed for periodic maintenance. Gauges like engine temperature, ampere meter are easily visible from operator's seat.

Hydraulics
Infinitely variable Hydrostatic drives are provided for Traction and Feeder systems with Electro / Hydraulic control. All Hydraulic pump, Motors, Hose-pipes, Hydraulic oil etc. are of reputed make.

Differential Gear Box
Two speed Differential gearbox is provided to achieve low speed for paving and high speed for traveling. All the gears are in oil-bath and are of proper alloy steel material hardened to get greater life. Gear box is provided with oil level indicator, air-breather and oil-drain plug for better operation and maintenance.

Power Distribution Gear Box.
It is coupled with the engine for coupling 3 pump sets. The gearbox is in oil bath all the gears are of proper alloy steel material and hardened for greater life. Bearings used in gearbox are of reputed make for greater life. Gearbox is provided with oil level indicator, Air breather, and oil drain plug for better operation and maintenance.

Brakes
The safety brakes consists of two hydraulic calipers and a brake booster, which are controlled by pedals near the operator's seat. The safety brakes are acting on the speed shaft, which are coupled to the drive wheels.

Material Handling System
The Independent movement of the two hopper wings is obtained by means of hydraulic cylinder. Two pallet conveyors with hardened Steel chain provide the Material to two sets of augers, which spreads material on both sides and are controlled independently from the operator's seat. Two thrust rollers are fixed on heavy oscillating beam provided on front part of the machine.

Worm Assembly
Worm spreads material in front of screed in total width of payment properly sealed imported bearings are used for greater life as they are always covered with the paving material while paving. Special arrangement for greasing is provided as greasing is required daily for greater life of bearing. Worm is of Ni-Hard material, properly hardened for greater service life. Proper covers for chain are provided for greater service life of chain.

Front Bogie Wheels
Four steering bogey wheel of solid rubber tyres, size 558 mm x 350 mm-four nos. are mounted to the front oscillating axle rocker arms. Hydraulic steering is fitted for effortless operation.

Rear Tyres
The Rear Driving Axle is fitted with Pneumatic tyres, Size 1000 x 20 four nos.

Operator's Seat
Operator's seat is fitted on the left side of the machine. The seat is adjustable. Control panel and operating levers are within the easy reach of the operator.

Controls
The machine is hydraulically controlled by mean of simple switches and levers. In case of breakdown, all valves in the hydraulic circuit can be manually operated.

Hydraulically Expendable Paving Screed Integrated With Tamping and Vibrating Mechanism
Screed is mounted on massive hard-chrome plated telescopic rams, These extensions enable the basic 2.6 Mtrs width to be widned upto 4.5 Mtrs. By attaching additional extension on bolts the screed will span an infinitely variable paving rande upto 5.5 Mrts.

Electronic Grade and Slope Sensor
The adjustment of laying mat thickness is controlled by Electronic sensor so as to allow easy modification of grade and slope according to the job requirement. Electronic sensor for slope and grade control of 'Moba' make Germany, is provided for accurate level of laid surface.

Technical Specification

Engine	105 HP @ 2200 RPM. Make Kirloslar, Ashok Leyland, Cummins or Any Reputed make.
Front Wheel	Solid Rubber Tyres 4 Nos. 558 Dia. X 350 mm
Rear Wheel	4 Nos. Pneumatic Tyres Size 1000 X 20
Steering	Hydrostatic
Transmission	Hydrostatic
Machine Weight	13,500 kg
Hopper Capacity	4.25 CM
Paving Thickness	10mm to 300mm
Paving Speed	0 to 80mtr./min.
Traveling Speed	0 to 16 Km/hrs. Max.
Material Laying	Max. 300 Tons/Hour. Max. Thickness up to 300 mm
Screed width	Basic width 2.6 meter Hydraulically, Extendable up to 4.5 meters and further Extension up to 5.5 meters by bolts.
Screed Vibration	Infinitely Variable
4 Nos. Hydraulic Motor	Frequency Max up to 3000 rpm (33.33 Hz)
Screed Tamping	Infinitely Variable
4 Nos. Hydraulic Motor	Frequency max up to 1600 rpm (25Hz)
Grade and Slope Sensor	Imported 'Moba' make or equivalent
Laying Application	Bituminous Material Optional: Wet Mix.
Fuel Capacity Diesel Tank Hydraulic Tank	150 Ltr. 150 Ltr.

Other Products in 'Hydrostatic Sensor Paver Finisher' category

Hydrostatic Sensor Paver Finisher for Wet Mix

<< Back